Galvanized Iron Sheets & Coils

If required, Galvanized Iron Sheets & Coils are skin passed for an extra smooth surface. Perfect for-painted surface preparation.

"GALVABOND" is requirements of the automotive, furniture and appliance industries.

Applications

• Jeepney and Bus Bodies
• BX Cables
• Aircon Ducting / Cooling Towers
• Garbage Chute / Cans
• Ice Moulds
• Roll-up Doors
• Pressure and Water Tanks
• Curtain Wall Panelling
• Poultry and Livestock Housing
• Cable Armour
• Furniture & Fixtures
• Steel Decking
• Appliance and Automotive Components
• Highway Guard Rails
• Roofing and Wall Cladding
• Electronic and Computer enclosure, chassis and support parts
• Packaging and Container
• Advertising Billboards
• Building Trusses, Sections Purloins & Beams
• Agri Storage, Enclosures

GALVABOND^TM  COILS

SPECIFICATION
 

Thickness*	0.30 mm -1.60mm
Width**	915 and 1220 mm
Inner Diameter (ID)	508 mm
Outer Diameter (OD)	800 mm- 2000mm
Flatness	Flatness B  or tabletop flatness
Surface Finish	Regular Spangle, Zero spangle and Mini Spangle Skin passed or Non-skin passed
Surface Treatment	Chemical Coated / Resin Coated / No Treatment
Zinc Coating Classes***	Coating Designation         Minimum Coating Mass                                        Triple Spot Test
	Z 100                          100 g/m2
	Z 120                          120 g/m2
	Z 150                          150 g/m2
	Z 180                          180 g/m2
	Z 215                          215 g/m2
	Z 250                          250g/m2
	Z 275                          275 g/m2
EQUIVALENT Standards	ISO3575/JISG3302 /PNS67 / ASTM A653
Mechanical Properties
T-bend	OT (180° bending angle)
	Full Hard	Commercial Quality
Yield Strength	No tension Test is required for hardness of 85 HRB or higher	275 MPA (minimum)
Hardness	85 HRB (minium)	57 HRB (maximum)

PREPAINTED GALVABOND^TM  COILS

SPECIFICATION

Thickness*	0.30 mm -1.20mm
Width**	915 and 1220 mm
Inner Diameter (ID)	508 mm
Outer Diameter (OD)	800 mm- 2000mm
Flatness	Flatness B  or tabletop flatness
Type of Coating***	Dry Film Thickness
Topcoat High Grade Polyester Fluorocarbon (PVdF) Backing Coat Polyester Primer Epoxy	Topcoat
	Primer	5 micons
	Finish Coat	15-17 microns
	Total	20-22 microns
	Backing Coat
	Primer                            5 microns
	Backing Coat                   5 microns
	Total                               10 microns
EQUIVALENT Standards	PNS 201 : JIS G 3312 and ASTM A755M
Mechanical Properties	(For Polyester Topcoat)
T-bend	5 T maximum(180° bending angle) no paint pick-off
Pencil Hardness Test	2H (minimum)
Reverse Impact Test	5 Joules (minimum)
Paint Durability
Salt Spray Test	Topcoat 1000 hours	Backing Coat 200 hours